Bund Lining Contractor
Bund lining is a specialist containment service that requires the correct materials, surface preparation and installation methods. Experienced bund lining contractors ensure the system is designed, installed and maintained to provide long-term chemical resistance and regulatory compliance.
What Does a Bund Lining Contractor Do?
A bund lining contractor designs, installs, repairs and maintains chemical-resistant lining systems for secondary containment structures. Their role is to ensure bunds remain impermeable, chemically resistant and compliant with relevant environmental regulations.
Areas Covered by Our Bund Lining Contractor Services
Bund Lining Materials Used by Our Contractors
Our Bund Lining Contractor Installation Process
1. Initial Enquiry
Discussion of stored products, site conditions and project requirements.
2. Site Survey
Assessment of substrate condition, contamination, existing coatings and detailing requirements.
3. Specification
Production of a written specification covering materials, thicknesses and compliance requirements.
4. Installation
Surface preparation, application, inspection and project handover.
Bund Lining Compliance Requirements
Bund lining systems must comply with relevant environmental and safety regulations. Requirements vary depending on the substances stored, containment capacity and site operations.
Environment Agency Guidance
Outlines containment expectations for oils, fuels and chemical storage.Non-compliance exposes the business to enforcement action, unlimited fines and, in the most serious cases, personal liability for directors. The cost of getting it right is always a fraction of the cost of getting it wrong.
Bund Capacity Requirements
Containment systems generally need to hold 110% of the largest vessel or 25% of total stored volume, whichever is greater.
COSHH & HSE Compliance
Requires suitable controls for hazardous substances and secondary containment.
Water Resources Act & EA Guidance
Places responsibility on operators to prevent pollution of controlled waters.
Get Independent Expert Advice
Speak to our technical specialists about your bund lining requirements. Free, no-obligation site surveys available nationwide.
Bund Lining Contractor FAQs
A bund lining contractor surveys, specifies, installs, repairs and maintains chemical-resistant containment systems. This includes substrate preparation, lining installation, joint detailing, inspections and compliance documentation.
Bund linings sit under a layered UK framework that includes the Water Resources Act 1991, the Oil Storage Regulations, COMAH, COSHH and HSE workplace law, SSAFO for agriculture and Environment Agency PPG guidance. We design every specification to evidence compliance across the specific regulations that apply to the site, the substance and the sector.
Yes, every quotation is preceded by a site survey covering substrate condition, existing lining (where present), chemistry, capacity, drainage and access. The survey lets us produce a specification matched to the actual asset rather than a generic price per square metre.
Bund lining cost depends on area, chemistry, substrate condition, build-up method and access, with typical projects ranging from a few thousand pounds for localised repairs up to six figures for full re-line of a large tank farm. We quote each project against the surveyed scope rather than a fixed per-square-metre rate, so the price reflects the real duty.
Most bund lining projects complete in three to ten working days including substrate preparation, application and cure, with rapid-cure polyurea compressing this further on time-critical assets. Larger tank farms, FRP/GRP lay-up work and multi-bund estates typically run from two to six weeks depending on scope and access.
Often yes, most installations can be staged into planned outages, weekend shutdowns or duty/standby rotations, with rapid-cure polyurea systems returning a bund to service inside 24–48 hours. Where a full asset shutdown is unavoidable, we programme around the shortest viable outage agreed with the operator.
We provide a written warranty on every bund lining project, typically covering 5–10 years on materials and workmanship depending on the specification, the exposure and the operating environment. Specific terms are issued with the quotation and reflect the design life of the system installed.
Bund linings should be visually inspected at least annually, with hydrostatic testing every three years for oil storage and at the interval set by the site’s environmental permit for chemical service. Full replacement is rarely on a fixed schedule. Most linings deliver 15–25 years before re-line, with localised repairs routinely extending that further.
Featured Case Studies
Get Independent Expert Advice
Speak to our technical specialists about your bund lining requirements. Free, no-obligation site surveys available nationwide.
